Our Products

Oxygen/Nitrogen Plant
--------------------------------------------
Liquid Oxygen Pump
--------------------------------------------
Expansion Engine
--------------------------------------------
Ancillaries
--------------------------------------------
Acetylene Plant
--------------------------------------------
Nitrous Oxide Plant
--------------------------------------------
Carbon di-Oxide Plant
--------------------------------------------
Cylinders
--------------------------------------------
Compressed Industrial Gas Cylinders
Careful procedures are necessary for handling the various compressed gases, the cylinders containing the compressed gases, regulators or valves used to control gas flow, and the piping used to confine gases during flow. We offer good quality seamless cylinders for compressed gases such as Oxygen, Nitrogen and Argon as per the following specifications.

  • Water Capacity : 46.5 - 47 Litres
  • Wall thickness : 5.0 mm min.
  • Outside diameter : 232 mm
  • Length (nominal) : 1240 mm
  • Weight (nominal) : 53.5 kg
  • Working Pressure : 15 Mpa (150 Bar)
  • Testing Pressure : 25 Mpa (250 Bar)
  • Thread of Cylinder : BS 341-1"-14
  • Configuration : With cap and neck ring but without valve
  • Bottom Type : Concave bottom type
  • Color : Black or as per your preference
  • Material : 34Mn2V or 37Mn steel


  • Important Point for Safety -
  • Cylinders should be placed with the valve accessible at all times.
  • Cylinders are equipped with either a hand wheel or stem valve
  • Cylinder valves should be opened slowly
  • Always make sure that the regulator and valve fittings are compatible.
  • Regulators are gas specific and not necessarily interchangeable!

  • Sanghi Organization
    Mr. Rajendra Singh (Export General Manager)
    No. 1 & 2, Turf View, Opposite Nehru Center, Seth Motilal G. Sanghi Marg, Worli, Mumbai - 400 018, Maharashtra, India.
    Tel: (91-22) 2496 6616 (12 lines) Fax: (91-22) 2494 7052
    E-mail: rajendra.singh@mksanghi.com